Exposed Thermostatic Shower Valve Pros Cons

The exposed thermostatic shower valve works as a temperature adjuster. In these showers the temperature is controlled by using wax cartridge thermostat that maintains the temperature of water at a constant level and automatically compensates the temperature fluctuations like hotness and coldness.

thermostatic shower valve image

To provide safety the exposed thermostatic shower valve stops the supply of water if temperature increases from the pre-set limit. There is a simple quarter turn ceramic disc valve that controls this flow.

Luxuries of an exposed thermostatic shower valve:

To get the luxuries of exposed thermostatic shower valve it is necessary that the pressure of water must be in range like a minimum static pressure of 5 bars, maximum maintained Pressure is 5 Bar, Minimum Maintained Pressure (Gas Water Heater): 1.0 Bar and For optimum performance the inlet pressures should be nominally equal and should not exceed 5:1, in favor of either supply, during flow. Minimum Maintained Pressure (Gravity System): 0.1 Bar. The installation of exposed thermostatic shower valve is very simple if you want to install this in your home it is necessary that you must remember these instructions. The installation must be carried out in accordance with in accordance with these instructions, and comply with the Water Supply Regulations 1999 or any particular regulations and practices, specified by the local water company or water under takers.

Make sure that the exposed thermostatic shower valve must not install in the area where it may freeze. A distance of at least 150 mm is required between any side walls and both the hot and cold inlets to allow access for tightening the inlet compression nuts. For stud partitions alternative fixings (not supplied) may be required. Pipe work must be rigidly supported and avoid any strain on the connections. Inlet and outlet threaded joint connections should be made with PTFE tape or liquid sealant. Do not use oil-based, non-setting joint compounds. Pipe work must be rigidly supported and avoid any strain on the connections.

Now decide the suitable location of the exposed thermostatic shower valve. In older days peoples were not give importance to their bath room but now a day it is need of time to make their bath more luxurious of comfortable. The reason that creates the desire of using exposed thermostatic shower valve is only one that peoples have no enough tiles to maintain the temperature of their shower. By using exposed thermostatic shower valve They make their family more secure because they have exposed thermostatic shower valve that is every time ready to serving you.

The exposed thermostatic shower valve is suitable for use at all common types of plumbing systems that may include the gravity; it is a modification and combination of boilers and high pressure unvented systems.

So if you want a luxury and safe bathing shower you have only one choice that is exposed thermostatic shower valve. That is available in market to make you bath full of enjoy able and save you from any dangerous situation.

 

Back to Top

© 2016 thermostaticshowervalve.net